Newtronic Systems Online Heated Handlebar Grips.

Chilli Heated Waist Coat | Heated Handlebar Grips

CHILLI HEATED WAISTCOAT

IDEAL FOR THOSE COLD WINTER NIGHTS

Keeping warm on a motorcycle has never been easy, even on those cold summer nights where the temperature can plummet unexpectedly.

The New Chilli Heated Waistcoat solves this problem instantly!!!

Using your Chilli heated waistcoat just couldn't be easier, simply connect the special fused wiring harness directly to your bike's battery, plug in the heat-control unit, dial-in the heat you want and that's it no more cold rides ever!

The heating elements in the garment are sandwiched between layers of thermal insulating material to give a uniform spread of heat over the entire warming area.

So there are no hot spots that could other wise cause discomfort or even burning.

If you're caught out in the rain your Chilli waistcoat still remains completely safe to wear.

So you don't have to sit there in the cold...

Pillion riders are not forgotten either, because the Chilli Heated Waistcoat uses so little power, most bikes will have no problem supporting two, so you both stay warm and cosy.

A special pillion lead can be supplied to make connecting simple. Great care has been taken to ensure that the Chilli Heated Waistcoat is completely safe to use.

Chilli Heated Waistcoat Features

	Variable heat adjustment from 0 to 100%	Supply voltage - 12 volts with a low drain
	VIDG Approved - Report No: 1404	CE Approved
	Made from high spec materials	Reversed polarity protected
	Over voltage/over current protected	High current capacity…10amp peak
	24 inch battery lead with inline 10amp fuse	Weight: 3 3/8 ounces or 95 grams


Product	Size	Price
Chilli Heated Waist Coat		Ł134.95
Accessories		Price
Additional Control Unit with Battery Lead		Ł49.95
Additional Battery Lead 24 inch		Ł15.00
Additional Battery Lead 48 inch		Ł15.00

HEATED HANDLEBAR GRIPS

THE WARMER WAY TO RIDE

FEATURES:

QUALITY NATURAL RUBBER GRIPS

FITS MOST 12 VOLT MOTORCYCLES

MAKES WINTER RIDING MORE PLEASANT

LOW POWER CONSUMPTION

No need to suffer frozen hands and fingers with these electrically heated grips. Complete with grips, wiring loom with built-in electronic fuse, handlebar mounted switch. It even includes tie-wraps and tape to complete installation. Designed to fit all 12 volt motorcycles with 7/8" (22mm) or 1" (25mm) diameter handlebars. It takes fractionally more current than a stop light bulb. They achieve full heat in approximately 2 minutes and can be left on continually when riding as they are self-regulating. Only the best components have been used to produce this high quality product.
Product	Kit	Price
STANDARD 7/8" (22mm)	HHG	Ł41.00
OVERSIZE 1" (25mm)	HHG 1"	Ł41.00
HARLEY DAVIDSON SINGLE CABLE	HDHHGS	Ł53.37
HARLEY DAVIDSON TWIN CABLE	HDHHGT	Ł53.37
ATV's	HHGATV	Ł41.00